BOOSTED 7875 (Generation 1) T4 TurbochargerSpecifications
Recommended horsepower rating: 500-1050HP
Recommended engine displacement: 2.0L to 6.0L
- 360° journal bearing
- Point Milled 7075 billet compressor wheel
-Ported shroud compressor cover
- Speed sensor portincluded in compressor cover (Speed sensor sold separately,AF8050-1010)
- External wastegate sold separately
- Inlet flange gasket and turbo drain gasket included in turbo kit
- Must use a -6AN oil feel line to maintain core temperature (Warranty VOID if not used)
- T4 single entry turbine inlet flange
- SiMo-nodular cast iron rear housing
- V-Band turbine outlet flange
- 1/8"NPT oil feed fitting (sold separately) or a 38mm 2-bolt oil feed plate with M8 x 1.25mm thread size
- 50.80mm bolt centre turbo drain flange with M8 x 1.25mm thread size
Compressor Specifications
Inducer: 78.13mm
Exducer: 102.40mm
Extended Tip: 106.30mm
Compressor Inlet: 4" slip fit
Compressor Outlet: 2.5" slip fit
Turbine Specifications
Inducer: 82mm
Exducer: 75mm
A/R: 0.96
Turbine Inlet Flange: T4
Turbine Outlet Flange: V-Band (AF8080-1024)
Wastegate
External wastegate
Recommended: 60PSI Boost / EGT Gauge
Note: For out of stock items, please contact service@spturbos.co.nz for expected delivery times.
Disclaimer: Due to the ever-changing rules around LVVTA standards it is the purchaser’s responsibility to check that these products are compliant with current standards for usage on public roads. Image may not represent actual turbo