AeroFlow Boosted 5455-0.63A/R Turbocharger -Black
AeroFlow Boosted 5455-0.63A/R Turbocharger -Black
AeroFlow Boosted 5455-0.63A/R Turbocharger -Black
AeroFlow Boosted 5455-0.63A/R Turbocharger -Black
AeroFlow Boosted 5455-0.63A/R Turbocharger -Black
AeroFlow Boosted 5455-0.63A/R Turbocharger -Black
AeroFlow Boosted 5455-0.63A/R Turbocharger -Black
  • Load image into Gallery viewer, AeroFlow Boosted 5455-0.63A/R Turbocharger -Black
  • Load image into Gallery viewer, AeroFlow Boosted 5455-0.63A/R Turbocharger -Black
  • Load image into Gallery viewer, AeroFlow Boosted 5455-0.63A/R Turbocharger -Black
  • Load image into Gallery viewer, AeroFlow Boosted 5455-0.63A/R Turbocharger -Black
  • Load image into Gallery viewer, AeroFlow Boosted 5455-0.63A/R Turbocharger -Black
  • Load image into Gallery viewer, AeroFlow Boosted 5455-0.63A/R Turbocharger -Black
  • Load image into Gallery viewer, AeroFlow Boosted 5455-0.63A/R Turbocharger -Black

AeroFlow Boosted 5455-0.63A/R Turbocharger -Black

Regular price
$1,550.00 NZD
Sale price
$1,550.00 NZD
Regular price
Sold out
Unit price
per 

BOOSTED 5455- Black Turbocharger Specifications

Recommended horsepower rating:  300-600HP (150-300HP Diesel)
Recommended engine displacement:  1.8L to 3.0L (3.8-4.5 Diesel)

Similar to GTX3071R Turbo


- Dual ceramic ball bearing
- Point Milled 7075 billet compressor wheel
- Ported shroud compressor cover
- Speed sensor port included in compressor cover (Speed sensor sold separately, AF8050-1010)
- External wastegate sold separately
- Inlet flange gasket, turbo drain gasket and -4AN turbo oil feed fitting with restrictor included in turbo kit. (Warranty VOID if not used)
- T3 single entry turbine inlet flange
- SiMo-nodular cast iron rear housing
- V-Band turbine outlet flange
- M14 x 1.5mm coolant port thread
- 7/16"-24 oil feed fitting with in-built restrictor
- 38mm bolt centre turbo drain flange with M8 x 1.25mm thread size

Compressor Specifications
Inducer:  54mm
Exducer:  71mm
Extended Tip:  73.79mm
A/R:  0.60
Compressor Inlet:  4" Slip fit
Compressor Outlet:  2" Slip fit

Turbine Specifications
Inducer:  60mm
Exducer:  55mm
A/R:  0.63
Turbine Inlet Flange:  T3
Turbine Outlet Flange:  V-Band (AF8080-1000) (Not included)

Wastegate
External wastegate (Not included)

Recommended: 60PSI Boost / EGT Gauge

Note: For out of stock items, please contact service@spturbos.co.nz for expected delivery times.

Disclaimer: Due to the ever-changing rules around LVVTA standards it is the purchaser’s responsibility to check that these products are compliant with current standards for usage on public roads. Image may not represent actual turbo