BOOSTED 4628 Black – 0.64A/R Turbocharger Specifications
Recommended horsepower rating: 200-450HP
Recommended engine displacement: 1.4L to 2.5L
Similar to GTX2860R Turbo
- Dual ceramic ball bearing
- Billet aluminium compressor wheel
- Ported shroud compressor cover
- Speed sensor port included in compressor cover (Speed sensor sold separately, AF8050-1010)
- Inlet flange gasket, turbo drain gasket and -4AN turbo oil feed fitting with restrictor included in turbo kit. (Warranty VOID if not used)
- T25 / T28 single entry turbine inlet flange
- SiMo-nodular cast iron rear housing
- 5-bolt turbine outlet flange
- M14 x 1.5mm coolant port thread
- 7/16"-24 oil feed fitting threadowow
- 38mm bolt centre turbo drain flange with M8 x 1.25mm thread size
- M8 x 1.25mm 5-bolt turbine outlet flange
- Internal wastegate actuator with 8.7psi spring
Compressor Specifications
Inducer: 46mm
Exducer: 60.1mm
Extended Tip: 62.24mm
A/R: 0.60
Compressor Inlet: 3" Slip fit
Compressor Outlet: 2" Slip fit
Turbine Specifications
Inducer: 53.9mm
Exducer: 47mm
A/R: 0.64
Turbine Inlet Flange: T25 / T28
Turbine Outlet Flange: 5-Bolt
Wastegate
Internal wastegate with 8.7psi actuator
Recommended: 60PSI Boost / EGT Gauge
Note: For out of stock items, please contact service@spturbos.co.nz for expected delivery times.
Disclaimer: Due to the ever-changing rules around LVVTA standards it is the purchaser’s responsibility to check that these products are compliant with current standards for usage on public roads. Image may not represent actual turbo